Avidsen YLVA 2+ Mode D'emploi page 19

1 - INTRODUCTION
Additional Monitor Slave: easy to install and
use, allows expanding Ylva video entryphone
system.
Main features:
• Color video reception: when a visitor presses
the call button on the outdoor unit, a pleasant
unit's chime rings and the picture immediately
appears on the Master monitor (main module)
and the Slave Monitor (additional module)
• Easy and intuitive installation.
• Protection against short circuits
• Protection against polarity inversion
• Ease of use: at any age users will be happy
with its ease of use.
• High-resolution image: the system relies on
the most advanced technologies to provide
excellent image quality.
• Automatic door and automation opening:
press the monitor buttons to control an electric
lock and a 12V relay for the automation (not
supplied).
IMPORTANT: Read this manual carefully before
installation. In case of need, Avidsen technicians
will be at your disposal to offer assistance.
ATTENTION: a wrong connection of wires can
severely damage your Entryphone and annul the
warranty.
2 -PRECAUTIONS FOR USE
Before installing this product, review the following
points:
• Do not install under extreme humidity or
temperature conditions, risk of rusts or dust.
• Do not expose to direct sunlight, rain or
excessive humidity.
• Do not overload extension cords or multiple
sockets.
• Do not install near other electronic devices like
computers, televisions or VCR.
• Do not install near chemicals, ammonia, or
sources of toxic gases.
• To clean the product, do not use solvents or
abrasive products. Use a soft cloth slightly
moistened with soap.
• If you do not use this product for a long period
of time, unplug it from the electrical outlet.
VIDEO MONITOR
• Do not connect this product to the public
telecommunications systems.
3 -INFORMATION FOR USERS
Pursuant to Article 13 of the Legislative
Decree No. 151 dated 25 July 2005,
"Implementation of Directives 2002/95/
CE, 2002/96/CE and 2003/108/CE,
concerning
dangerous substances in electric and
electronic devices, as well as disposal of waste".
The symbol of the crossed out garbage bin found on
the device or on its packaging indicates that the
product, at the end of its service life, must be
disposed of separately from other waste. The user
shall bring the equipment at the end of its lifetime in
places dedicated to collect electrical and electronic
waste, where foreseen.
Pour en savoir plus :
www.quefairedemesdechets.fr
A - IMPORTANT
reduction of use
3
of
GB