Kenwood TCM300 Instructions page 6

troubleshooting guide
Problem
Toaster does not
operate.
Carriage lever not
staying down
Uneven Browning.
Toast colour too light
or too dark.
Burning smell or
smoke from slots.
If none of the above see "Service & Customer Care".
English
Cause
No power.
Toaster not plugged in. The lever will not stay
1 Slice of bread being
toasted.
Bread slices of
different size,
freshness or thickness
being toasted at same
time.
Wrong browning
setting used.
Crumb tray full.
Food particles stuck
to element or loose in
toasting slots.
6
Solution
Check toaster is plugged in.
Check the fuse/circuit
breaker in your home.
down unless the toaster is
plugged in.
For best results ensure that
the bread slices are of an
even thickness, freshness
and size.
In order to achieve uniform
browning we recommend
you wait a minimum of 30
seconds between each
toasting so that the control
can automatically reset.
Alternatively select a lower
setting when additional
toasting is carried out.
Select a higher or lower
browning setting.
Refer to "hint" section.
Unplug before checking the
slots.
Remove any loose food
particles.
Remove and clean the
crumb tray.