Publicité
Les langues disponibles
Les langues disponibles
VI. MAINTENANCE AND STORAGE
6.1- Cleansing
- Clean plastic parts with a soft and clean cloth
- Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
- Do not use any caustic to clean the plastic parts.
- Do not put or immerse tool in water or any other liquid.
6.2- Sharpening the helical blades
WARNING! This operation requires working near the blade.
For your safety, it is recommended to:
- wear protective gloves;
- block the rotary blade to prevent it from turning on itself
It is possible to sharpen the blade rotary cutter with sharpener or mini-grinder, then:
a) Turn the trimmer body to access the rotary blade.
b) Lock the rotary blade with blocks.
c) Sharpen the blade exposed.
d) Remove the blocks, and gently rotate the rotary cutter, to access other parts of the blade.
6.3- Service
a) Have your tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
b) Have your tool repaired by a qualified person
Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged part
in an authorised service centre is recommended.
c) Maintain tool with care.
Keep tool clean for better and safer performance.
6.4- Storage
Store product, instructions manual and accessories in its original packaging.
Product must be stored in a clean and dry location. Always lock up product and keep out of reach
of children.
Do not store or place any objects on the lawnmower.
6.5- Disposal
Do not dispose with household garbage. Do not throw into the environment.
Dispose of the tool in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
Page 16 / 27
Publicité
