Publicité
Les langues disponibles
Les langues disponibles
6. Use protective equipment
- Use safety glasses
- Use dust protection mask if working operations create dust.
7. Do not overreach
Avoid any abnormal posture. Keep proper footing and balance at all times.
8. Maintain tools with care
- Abide by the maintenance and replacement blade regulations
- Keep cutting tools sharp and clean for better and safer performance.
- Follow instructions for lubricating and changing accessories.
- Keep handles dry, clean and free from oil and grease.
- It is your own interest to keep your machine clean at any time.
- After you finish working, check the machine for any damage.
9. Stay alert
Watch what you are doing. Use common sense. Do not operate tool when you are tired, under the
influence of alcohol, prescription medicines or drugs.
A single moment of inattention, while operating the tool, may result in injury or damage.
10. Check damaged parts
- Before further use or reuse of the tool, tool should be carefully checked to determine that it will
operate properly and perform its intended function.
- Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
- Any parts should be installed properly to comply with the conditions of the machine safe
operation.
- A protective guard or other part that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual.
11. Warning
The use of any accessory or attachment, other than one recommended in this instruction manual
may present a risk of injury (to persons or animals) and may cause damages.
The user and/or operator are responsible for any damages or injury caused to properties and/or
persons.
12. Have your tool repaired by a qualified person
Repairs should only be carried out by qualified persons using original spare parts; otherwise this
may result in considerable danger to the user.
The use of unauthorized parts or failure to follow the maintenance instructions may result in injury
or damage.
13. Remarks
The safety precautions and instructions given in this manual are unable to cover in detail all the
conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product
especially for any matters that are not referred in the above.
14. The protective device (if any) must be placed in the appropriate position, to avoid danger for
the user.
Page 12 / 27
Publicité
