Erasing; Erasing From A Cdrw Disc - Philips CDR-795 Mode D'emploi

Erasing

Erasing from a CDRW disc

It is possible to erase one or more tracks (starting from the
end of the last track) or the entire CDRW. It is not possible
to erase from a CDR.
Erasing one or more tracks
1
Insert the CDRW from which you want to erase tracks in
the CD recorder tray.
2
Press ERASE CD shortly to enter the erasing menu.
If an unfinalized CDRW is inserted:
ERASE LAST TRACK? and PRESS ERASE are
➜
displayed alternately.
If a finalized CDRW is inserted:
FINALIZED CD will be displayed briefly.
➜
ERASE LAST TRACK?, followed by PRESS ERASE
➜
are displayed alternately.
To select a particular track you wish to erase press ¢ or
0 0
4 as often as necessary on the CD recorder side to
select the desired track number(s).
ERASE TR and the track number (e.g. 10+) are displayed.
➜
To select more tracks to be erased repeat this step.
Note:When erasing several tracks, the tracks to be erased
must be selected in sequence, starting from the last recorded
track. Example:The CDRW has 5 tracks recorded on it. Now,
you can erase tracks 5 and 4.You can also erase tracks 5, 4
and 3, but you cannot erase tracks 5 and 3!
3
Press ERASE CD again to start erasing.
If an unfinalized CDRW is inserted:
ERASE is displayed, the operation time left starts to
➜
count down and erasing starts.
If a a finalized CDRW is inserted:
UNFINAL is displayed, the operation time left starts to
➜
count down and unfinalizing starts.
Afterwards ERASE is displayed, the operation time left
➜
starts to count down and erasing starts.
22
Erasing an entire CDRW
1
Insert the CDRW you want to erase in the CD recorder
tray.
2
Keep ERASE CD pressed for more than 1 second to enter
the erasing menu.
If an unfinalized CDRW is inserted:
ERASE DISC? and PRESS ERASE are displayed
➜
alternately.
If a finalized CDRW is inserted:
FINALIZED CD will be displayed briefly.
➜
ERASE DISC? and PRESS ERASE are displayed
➜
alternately.
3
Press ERASE CD again to erase the entire CDRW.
If an unfinalized CDRW is inserted:
ERASE is displayed, the operation time left starts to
➜
count down and erasing of the entire CDRW starts.
If a finalized CDRW is inserted:
UNFINAL is displayed, the operation time left starts to
➜
count down and unfinalizing starts.
ERASE is displayed, the operation time left starts to
➜
count down and erasing of the entire CDRW starts.