Erasing A Programme; Cassette Playback - Philips AZ 1560 Mode D'emploi

AZ 1560 /00 10
page
CD PLAYER
Reviewing the programme
In the stop position or during playback, press and hold down
PROG for a while until the display shows all your stored track
numbers in sequence.

Erasing a programme

You can erase the programme by:
– pressing STOP 9 once in the STOP position;
– pressing STOP 9 twice during playback;
• The display shows
The programme is also erased by:
– pressing the CD door open;
– selecting another source: TAPE/ TUNER.

CASSETTE PLAYBACK

1. Select TAPE source.
™ The display shows
TAPE
2. Press OPEN•STOP /9 to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY 1 to start playback.
5. To interrupt playback press PAUSE ;. To resume, press this
key again.
6. By pressing SEARCH 5 or 6 on the set fast winding of the
tape is possible in both directions.
7. To stop the tape, press OPEN•STOP /9.
• The keys are automatically released at the end of the tape,
except if PAUSE ; has been activated.
Note: The sound source cannot be changed while playing a
cassette.
10
briefly and disappears.
PROG
throughout tape operation.
CASSETTE RECORDER