wallas 22 Dt Mode D'emploi page 68

Support sleeve ø 2 mm
D10041A
22 Dt / 30 Dt / 40 Dt
Installation
Installation instructions for Tank connection
If the fuel will be taken from a separate tank, you must install a tank connection
367215 (4 m) / 367216 (6 m).
• Tighten the barrel nut tightly to the fuel pump connector. Keep the parts and
the hose clean and ensure that the connection is tight, because an air leak in
the connector will stop the device from functioning.
• Install the tank connection in the tank.
Barrel nut
Olive ø 5 mm
Protection spiral
Barrel nut
Seal
Washer
Sinter bronze filter
- 68 -
en
Vent hose
Screw cap
Cap seal
490526C