wallas 22 Dt Mode D'emploi page 61

D10081
22 Dt / 30 Dt / 40 Dt
Installation
Fastening the device
Fix the mounting plate (1) with screws (2) to a suitable place and check that the
bottom of the heater is in horizontal position.
Lift the heater into the installation plate and lock the device with the mounting bolts
(3). There has to be a washer (4) and a corrugated base plate (5) under the head
of the screw. Be sure that the edge of the mounting plate will lock to the slot in the
side profile of the heater.
Connect the exhaust gas pipe with a hose clamp (6) 22 Dt and 30 Dt or (7) 40 Dt.
22 Dt
30 Dt
2
1
- 61 -
en
40 Dt
7
6
4 5
490526C
3