Publicité
Les langues disponibles
Les langues disponibles
Figure 8. Install the AC Power Supply Unit
1.
PSU
4.
Attach the power cables from the switch PSU to the external power
source.
NOTE: The system is powered-up as soon as you connect the
power cord between the system and the power source.
5.
Repeat steps 1 through 3 for the second PSU.
NOTE: Ensure that the PSU is correctly installed. When you correctly
install the PSU, the power connector is on the left side of the PSU.
Installing a Fan Module
1.
Remove the fan module from the shipping box.
2.
Use the grab handle to slide the module into the switch fan slot.
16
2.
Switch slot
Publicité
