Furrion ARCTIC FCR10DCDTA Serie Manuel D'instructions page 9

Hole Plastic Cover Plugs
Hinge A
Fig. 9
2. Disassemble the Refrigerator Door by removing the Hinge
B and Hinge C fixing screws. (Fig. 10)
Hinge B
Hole Plastic
Cover Plugs
Hinge C
Fig. 10
3. Reverse the parts of Freezer Door Lock Cover, Metal
Bracket, Plastic Bushing, Freezer Door Lock, Lock Fixing
Block to the opposite side respectively. (Fig. 11)
Lock Fixing Block
Freezer Door
Lock
Fig. 11
Plastic Bushing
Freezer Door Lock Cover
Metal Bracket
4. Remove the Refrigerator Door Lock Cover (right) and
save it for future use. Change Refrigerator Door Lock and
Lock Fixing Blocks to the opposite side. Install the left side
Refrigerator Door Lock Cover, provided as an accessory
with the unit, where the door lock was. (Fig. 12)
Refrigerator Door Lock
Lock Fixing Block
Refrigerator Door
Lock Cover (left)
Fig. 12
5. Reverse the Metal Bracket and Plastic Bushing on the
bottom of Refrigerator Door. (Fig. 13)
Fig. 13
6. Unscrew the Door Latch Bracket fixing screws and
change it to the opposite side. (Fig. 14)
Fig. 14
Refrigerator Door
Lock Cover (right)
Plastic Bushing
Metal Bracket
9