Honeywell RTH8500 Manuel Du Propriétaire page 14

Clock setting
1. To set the current time display,
press CLOCK, then press s or
to adjust the time. Press and hold
to advance the time more
s or t
quickly.
2. Press DONE to save & exit (or press
CANCEL to exit without changing the
time).
NOTE: The real-time clock should
never require adjustment since it
automatically updates for daylight
savings time, and stores all date/time
information.
NOTE: To change the current week
day display, see see System Setup in
your Installation Guide.
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-set settings (shown in the
table below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you
awaken and the temperature you
want during the morning, until
you leave for the day.
Leave - Set to the time you leave
home and the temperature you
want while you are away (usually
an energy-saving level).
Return - Set to the time you
return home and the temperature
you want during the evening,
until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight
(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.
FAN
Inside
AUTO
t
FAN
Inside
SCHED
AUTO
DONE
Wake
(6:00 am)
Leave
(8:00 am)
Return
(6:00 pm)
Sleep
(10:00 pm)
14
WED
70
Set To
6:01
AM
WED
70
HOLD CLOCK SCREEN
Set To
6:02
AM
Heat
70
°
62 °
70 °
62 °
70
70
MORE
M28375
CANCEL
M28376
Cool
75
°
83 °
75 °
78 °