Titanium wi-1000 Guide D'utilisation page 16

5. Machine maintenance Capitolo
5.1 Unplug the power cord during maintenance.
5.2 Clean hot seals and rollers regularly. Refer fig 13.
5.3 Ensure there is no jammed film and dirt at the air nozzle or cutter blade.
5.4 Clean the air nozzle regularly.
5.5 Renew the cutter blade when blade is not
sharp.
6. Specification
Sealing speed
Air density control
Roll film size
Power voltage
Electrical rate
Machine size
Machine weight
14
2.7-2.9m/min (fix speed)
Adjustable (200/400mm
setting and operation range)
2 0 0 x 8 0 m m 2 0 0 x 1 0 0 m m 2 0 0 x 1 5 0 m m
200x150mm 400x250mm 400x290mm
220-240V � 50Hz �
110-120V � 60Hz �
455×215×215(mm)
in
750W (220-240V)
400W (110-120V)
3.6kg
13
Right
/Left
heating
roller
a different