Titanium wi-1000 Guide D'utilisation page 14

2.4. Hibernation Function Capitolo
After continuing non-use of 2 hours, machine will go into a hibernation sta-
tus. Each hibernation countdown is trigged by press start/stop button, and
each press will resets the previous countdown and start for next 2 hours cycle.
During the hibernation status, the power indicate red-light goes slow flashing,
start/pause green-light off, and motor, air blower, heating system are all stop
working. By press start/pause button again will wakeup the machine, the red-
light goes on, green-light flashing, air blower start working, all heating system
into 4-minute warm up process till the green-light solid on, then you can press
start/pause button to use the machine normally.
Caution: The machine need to warm up around 4 mins for every cold start. W e
suggest to installing the roll film right after you turn on the power switch.
12
9
Fan Control
10