Installation Instructions; Before You Begin; General Dimensions; Cabinet Cutout Dimensions - Thermador TCMTK30RS Mode D'emploi

Installation Instructions

Before You Begin

Trim Kits
Trim kits are designed for use ONLY with the Thermador
Built-in Coffee Maker models TCM24RS.
IMPORTANT: The Built-in Coffee Maker installation
instructions can be found in the Built-in Coffee Maker
Assembly. The coffee maker must be installed according
to the instructions in the Installation Manual. If the
instructions are not followed, this may result in
unsatisfactory installation or unit performance.
Tools Needed
• Phillips head screwdriver
• T-20 Torx screwdriver
• Measuring tape
• Drill with bits (1/16'')
Screws Included with the Coffee Maker Trim Kit
#8 x ¾'' wood Screw (Phillips)
14 x
M4 x 25mm Screw (T20 Torx)
7 x
#10 x ½ Screw (T20 Torx)
4 x
Items Used Included with TCM24RS Coffee Maker
Spacer
1 x
4 x
Page. 3
Shims

General Dimensions

inches (mm)
22" (558)
"
17 11 /16
(449)
¾
13 " (349)
¾
14 " (374)

Cabinet Cutout Dimensions

inches (mm)
⅞ ⅞ ⅞ ½ ½ ½
19 19 19 " – 23 " – 23 " – 23 " " "
(504 – 597) (504 – 597) (504 – 597)
⅝
19
(498)
⅞
17 "
(455)
½
23 " (596)
¾
29 " (755)
¼
19 "
½ ½ ½
28 28 28 " " "
(488)
(724) (724) (724)
"