Bond PGF5820-2 Guide D'utilisation page 8

ASSEMBLY INSTRUCTIONS
4. Put the 20 lb propane gas tank (not included)
into the tank holder (F). Turn the wing screw on
the outside of the tank holder (F) clockwise to
tighten the tank into the tank holder.
DANGER
Propane tank must be a minimum of 60 in (1.52 m)
away at all times.
5. Turn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the body to the cylinder valve by
turning the regulator coupling nut clockwise.
Make sure it is fastened securely and tighten
connections by hand only.
WARNING
Please inspect the rubber O ring in the propane
tank valve to ensure it is not worn before attaching
regulator. Worn rubber O ring can cause leaks,
explosions and serious injury by propane tank.
6. Cover the body (B) with the lid (A). To lock
lid (A) in place, turn clockwise. To unlock, turn
counterclockwise.
Page 8
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
RUBBER O RING
B
F
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
A