Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
C CARE FOR YOUR SHAVER
• Care for your appliance to ensure a long lasting performance.
• We recommend you clean your product after each use.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
C CLEANING CAUTIONS
, DAILY
• Ensure the shaver is switched off.
• Open the shaver head by pressing the release button on the front of the
shaver.
• Tap out excess hair shavings and use a cleaning brush if necessary.
• Close head assembly.
, MONTHLY
• Perform the daily cleaning steps first.
• Open the shaver head by pressing the release button on the front of the
shaver and flipping open the head away from the body of the shaver.
• Release the inner cutter carrier away from the inner cutters.
• Thoroughly brush hairs from the inner and outer cutters and rinse out any
remaining debris.
• Replace the inner cutter.
• Place the inner cutter carrier back onto the upper hair pocket and lock into
place by rotating the locking arms clockwise until the arms 'click' into place.
• This shaver is a wet shaver, the hand-held part of which may be used in a
bath or shower.
, TROUBLESHOOTING
• If your shaver battery is completely empty or the shaver has not been used
for an extended period of time, the shaver may not start when operated
using the cord. If this occurs, a 5 minute quick charge will allow for 3 minutes
of shaving.
BATTERY REMOVAL
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
5
Publicité
