Publicité
Les langues disponibles
Les langues disponibles
INDIGO
Quax
First dreams
®
First steps
Step 8 : Use both cross bars EB6, four wooden dowels F and four eccentrics H
Push a wooden dowel (F) into the drillings on the sides of the cross bars (EB6). Push an eccentric (H) into the
holes on the ends of the cross bars.
Step 9 : Use the parts of steps 3, 5, 6 and 7
Push the bottom slats (EB4), the cross bars (EB6) and the bottom (EB3) with their wooden dowels in the drillings
and over the connectors of the right side (EB2 RH), tighten the eccentrics and hold the slats. Now push the left
side (EB2 LH) with its connectors in the drillings and over the wooden dowels of all slats and the bottom. Tighten
the eccentrics. Push the top (EB1) with its connectors in the drillings and over the wooden dowels of the sides.
Tighten the eccentrics.
Step 10 : Use the parts of step 9, the back EB8 and twenty-two wood screws K
Place the structure with its front on the blanket. Place the back (EB8) parallel to the back of the structure. Check
if distance A = B. Now fi x the back on the structure with the wood screws (K)
44
Kleerkast met draaideur en drie laden
540454xx-1D
Schrankwand mit Tür und 3 Schubladen
Armoire à porte battante et 3 tiroirs
Wardrobe with door and 3 drawers
Publicité
