Quax INDIGO 540454-1D Serie Manuel page 43

INDIGO
540454xx-1D
Step 7 : Instructions for a left assembled door. Use both sides EB2 LH and EB2 RH, the sliders J LH
and J RH, twelve bolts I, four wooden dowels F, fourteen connectors G, four nuts E, six eccentrics H, two
hinge mounting plates M, eight shelves supports O and two clothes rail holders R
Position the sliders (J) on the provided drillings of the side panels (EB2 LH and EB2 RH). Fix each slider
with two bolts (I) according to the diagram in detail (third hole on the
(G) into the holes on the edges the sides. Push two wooden dowels (F) into the holes provided on top of
the sides. Push two nuts (E) into the drillings provided at the bottom of the sides. Push three eccentrics (H)
into the drillings provided at the top of the sides. Attach the hinge mounting plates (M) with the provided
screws in the drillings on the front side of the left side (EB2 LH). Push the shelf supports (Q) in the drillings
on the innerside of the side and make sure they are at the same height. Push the clothes rail holders (R)
in the holes on the top of the side. Instructions for a right assembled door. Attach the hinge plates (M)
with the screws in the drillings on the front side of the right side (EB2 RH) instead of the left one.
Kleerkast met draaideur en drie laden
Schrankwand mit Tür und 3 Schubladen
Armoire à porte battante et 3 tiroirs
Wardrobe with door and 3 drawers
slider). Tighten seven connectors
Quax Quax
First dreams First dreams
® ®
First steps First steps
43