MAXSA 44416 Mode D'emploi page 4

TROUBLESHOOTING
PROBLEM
Light will not switch on
when there is move-
ment in the detection
area.
Light switches on during
the day.
Light switches on for no
apparent reason.
MAXSA Innovations, LLC warrants to the original consumer/purchaser that this product shall be free of defects in material and workmanship under
normal use and circumstances for a period of one (1) year from the date of original purchase for use. When the original consumer/purchaser returns
the product pre-paid (consumer pays return shipping) to MAXSA Innovations, LLC, 8412 Cathedral Forest Dr; Fairfax Station, VA 22039; USA within
the warranty period, and if the product is defective, MAXSA Innovations, LLC will at its option repair or replace such. This warranty shall constitute the
sole liability of MAXSA Innovations, LLC concerning the product. MAXSA Innovations, LLC expressly disclaims all other warranties INCLUDING, WITH-
OUT LIMITATION, THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO PERSON, FIRM, OR
COPORATION IS AUTHORIZED TO ASSUME FOR MAXSA Innovations, LLC ANY OTHER LIABILITY IN CONNECTION WITH THE SALE AND USE
OF THE PRODUCT. MAXSA Innovations, LLC and agents and distributors will bear no liability whatsoever for incidental or consequential damages or
charges of any kind. Some states do not allow the reclusion or limitation of incidental or consequential damages, so the above disclaimer regarding
incidental or consequential damages may not apply to you. This warranty is void if the product has been damaged or tampered with or if the product or
any such parts have been opened. In all cases of damage during shipment, a claim must be filed with the shipping carrier and not with MAXSA Innova-
tions, LLC. This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
SOLUTION
Ensure that the power switch on the main body has been turned to the AUTO position.
Ensure that the motion sensor has been positioned to face oncoming movement.
Ensure that the batteries have been fully charged in direct sunlight for 3 sunny days. Refer
to the "Before First Use of Your Solar Security Light" section on page 4.
Check to see that the solar panel is facing south so that it receives direct sunlight for most
of the day, enabling the batteries to fully charge.
Check to see that the LUX control has not been set too far towards (  ). Setting the LUX
control too far towards (  ) will cause the Solar Security Light to turn on only in complete
darkness.
Check to see that the motion sensor is not near night time light sources such as street lights.
The LUX control may be set too far towards the () position.
Reposition the motion sensor.
Moving trees, traffic, pets or birds may be getting in the area of detection. This may be
unavoidable, however the sensor could be redirected to a height where this is less likely to
occur.
If there are reflective objects in the detection area such as windows, water, or white walls,
you may need to redirect or possibly reposition the motion sensor.
Test the motion sensor by covering it completely with cardboard and waiting several minutes
to make sure it does not detect motion. If the light still switches on, please contact MAXSA
for further assistance.
1 YEAR LIMITED WARRANTY
info@maxsainnovations.com
Page 4
v15-2
2015