MAXSA 40240 Instructions D'installation Et D'utilisation

ANYWHERE LIGHT
40240, 40241,40242
ABOUT YOUR MOTION-ACTIVATED ANYWHERE LIGHT
Totally portable and weatherproof.
Perfect outdoors for doors, steps, decks, sheds, garages,
pathways, porches, and anywhere additional light is needed.
Also perfect indoors for hallways, stairways,closets, and
bathrooms.
Built-in motion sensor automatically turns on the light when
movement is detected in the area. The light remains on while
motion continues to be detected in the area.
Built-in photosensor enables the light to only turn on at night.
The 4 super bright LEDs have an estimated life of 30,000 hours,
so they never need changing.
Requires 4 D cell batteries (not included). The batteries typically
last up to 1 year under normal use.
1. To access the battery compartment, twist open the back half
of the light counterclockwise.
2. Remove the battery compartment cover by squeezing the
two tabs on the cover inward.
Presser les
deux languettes
motion-activated
TM
D
3.
4.
5. Reassemble the Motion-Activated Anywhere Light by twisting
the back half of the light clockwise tightly to ensure a weather
proof seal.
TM
Anywhere
TM
TM