Hilti HSL-4 Mode D'emploi page 2

Centre Scientifique et
Technique du
Bâtiment
84 avenue Jean Jaurès
CHAMPS-SUR-MARNE
F-77447 Marne-la-Vallée Cedex 2
Tél. : (33) 01 64 68 82 82
Fax : (33) 01 60 05 70 37
European Technical
Assessment
English translation prepared by CSTB - Original version in French language
General Part
Nom commercial
Trade name
Famille de produit
Product family
Titulaire
Manufacturer
Usine de fabrication
Manufacturing plants
Cette évaluation contient:
This assessment contains
Base de l'ETE
Basis of ETA
Cette évaluation remplace:
This assessment replaces
Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and should
be identified as such. Communication of this European Technical Assessment, including transmission by electronic means, shall be in full.
However, partial reproduction may be made, with the written consent of the issuing Technical Assessment Body. Any partial reproduction
has to be identified as such.
Hilti HSL4
Torque-controlled expansion anchor, made of galvanised steel,
for use in concrete: sizes M8, M10, M12, M16, M20 and M24.
Hilti Corporation
Feldkircherstrasse 100
FL-9494 Schaan
Principality of Liechtenstein
Hilti plants
29 pages incluant 26 pages d'annexes qui font partie intégrante de
cette évaluation
29 pages including 26 pages of annexes which form an integral part
of this assessment
DEE 330232-01-0601 "Ancrages mécaniques dans le béton"
EAD 330232-01-0601 "Mechanical fasteners for use in concrete"
-
-
Member of
www.eota.eu
ET A-19/0556
of 03/06/2021