Bosch MUM 2 Serie Manuel D'utilisation page 32

en Before using for the first time
Moving the drive to the parked
position
Requirement: The rotary switch is
set to ⁠ .
Set the rotary switch to
▶
a The drive slowly moves until the
correct parked position is reached.
Note: If the drive does not move, the
correct parked position has already
been reached.
Before using for the first time
6 Before using for the
first time
Prepare the appliance for use.
Before using for the first time
6.1 Preparing the appliance
Press the release button and raise
1.
the swivel arm until it engages.
→ "Moving the swivel arm",
Page 32
Lift and remove the bowl.
2.
→ "Removing bowl", Page 32
Clean all parts that come into con-
3.
tact with food before using for the
first time.
→ "Cleaning and servicing",
Page 34
Put the cleaned and dried parts
4.
out ready for use.
Basic operation
7 Basic operation
Basic operation
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
Pull the power cable out to the re-
1.
quired length.
32
2.
7.2 Moving the swivel arm
and hold.
1.
a The swivel arm is fixed in posi-
2.
a The swivel arm is fixed in posi-
7.3 Inserting bowl
▶
7.4 Removing bowl
▶
7.5 Inserting tools
Requirement: The drive is in the
parked position.
→ "Moving the drive to the parked
position", Page 32
1.
2.
To shorten the cable, push it into
the cable storage compartment.
Press the release button and raise
the swivel arm until it engages.
→ Fig.
3
tion 2.
Press the release button and move
the swivel arm down until it en-
gages in the vertical position.
→ Fig.
4
tion 3.
Place the bowl in the base unit.
→ Fig.
5
The bowl must be positioned
straight and firm on the base unit.
Lift and remove the bowl.
→ Fig.
6
Select the tool required.
→ "Overview of tools", Page 31
Press the tool into the main drive
until it engages.
→ Fig.
7