Climadiff CLIMA24R Notice D'utilisation page 34

Drainage instructions
Manual:
 When the machine stops after the water is full, turn off the machine
power and unplug the power plug. Thanks to the wheels, you can
move the air conditioner where the water can be directly and easily
drained (example: toilets, sewers, etc.). Otherwise, please place the
water container below the side water outlet behind the body.
 To do this, unscrew the drainage cover and unplug the water plug at
the back of the unit; the water will automatically flow into the water
container. Keep the drainage cover and the water plug properly.
During drainage, the body can be tilted slightly backwards.
 When the water is discharged, stuff the water plug, and tighten the
drainage cover.
Caution:
Please move the machine carefully, so as not to spill the water in the water pan at the bottom of the
body.
Continuous drainage:
This function is only applicable for cooling and dehumidification
modes.
1) Unscrew the drainage cover, and unplug the water plug.
2) Set the drainage pipe into the water outlet.
3) Connect the drainage pipe to the bucket.
4) Remember to monitor the water level in the recovery tank to
avoid overflow.
6. MAINTENANCE
Caution:
Before cleaning the appliance or filters, please turn off the air conditioner and pull out the plug. To
unplug the appliance, please make sure to remove the plug and not the cord.
1. Cleaning surface
Regularly clean the inside and outside of the unit to prevent dust from accumulating inside and outside,
thanks to a soft, dry cloth. Do not use chemical reagents, such as benzene, alcohol and gasoline, etc.
34