Climadiff CLIMA24R Notice D'utilisation page 33

Remote control
POWER: press the key to turn on or turn off the machine
MODE: press the key to switch between cooling, dehumidification, fan and heating mode
+: press the key to increase temperature and timing set value
-: press the key to reduce temperature and timing set value
FAN: press the key to select high, medium and low wind speed output circularly
TIMER: press the key to set timing value
SWING: press the key to open or close swing style. Air flow of the air outlet can blow at
different angles
C° F°: press the key to switch between Celsius and Fahrenheit
Protection functions
Automatic defrosting:
The machine has automatic defrosting function: during defrosting, heating symbol on the display screen will
flash.
Overflow protection function:
When water in the water pan exceeds the warning level, the machine will automatically sound an alarm, and
the LDC temperature display area will show „FL". At this point, you need to move the drainage pipe
connecting the machine or the water outlet to sewer or other drainage area to empty the water. After the
water is emptied, the machine will automatically return to the original state.
Automatic thermal protection:
To protect the service life of the machine, the machine has automatic thermal protection in heating mode.
During the protection period, the compressor and the lower motor will stop operation and will automatically
return to normal heating state after the temperature of the machine recovers.
Protection function of the compressor:
To increase the service life of the compressor, it has a 3-minute delay booting protection function after the
compressor is turned off.
33