Audio Pro Business SP-1 Manuel D'utilisation page 7

5. PLACE COMPONENTS
• Place TX-1 as high as possible.
• Place VOL-1 as high as possible.
• Secure SP-1, SP-2 in tracks (or on wall using wallbracket), preferably on same height as TX-1.
• Place SUB-1, SUB-2 on wall using wallbracket, preferably on same height as TX-1.
6. CONNECT TX-1 TRANSMITTER TO A SOUND SOURCE
• A. Music streaming box / other analogue music source
Connect to analogue 3,5 mm output. TX-1 will need to be connected to supplied USB power supply.
• B. Computer
Mac setup
1. Insert TX-1 via USB extension cord to a free USB socket.
2. Go to System Preferences, choose Sound under Hardware.
3. Click Sound Output in menu, choose "AudioPro TX-1".
PC setup
Please do following setup before using music playing software.
1. Connect TX-1 to PC via USB.
For some PC computers you may need to perform these settings:
2. Click Start button, go to Control Panel and choose "Sound".
3. Under playback of audio, default unit, choose "AudioPro TX-1".
7. SETTING DIFFERENT VOLUME IN THE VOLUME ZONES
• Use VOL-1 to set each volume zone individually. Choose volume zone A to F or Master volume.
(Master volume effects all zones.)
8. CHECK WIRELESS STATUS
• All components has a LED light to indicate wireless status.
• Blue light: wireless connection ok.
• Red light: wireless connection fail (or standby).
7