Audio Pro Business SP-1 Manuel D'utilisation page 9

TROUBLESHOOTING - IF YOU HAVE PERFORMANCE ISSUES
HOW FAR APART ARE THE TRANSMITTER AND RECEIVER?
If distance between the transmitter and receiver is too far, the, connection might be lost. Try placing the transmitter and
receiver in closer proximity.
ARE THERE WALLS BETWEEN THE TRANSMITTER AND LOUDSPEAKERS?
If your premises has thick concrete walls, or walls of plaster with wire lath, the wireless range will decrease.
Try placing transmitter and speakers in the same room.
ARE THE UNITS PAIRED?
CONSTANT BLUE LED means that it is connected to TX-1.
FLASHING BLUE LED means it is in paring mode - make sure that TX-1 also is in pairing mode.
FLASHING RED LED means that it is searching but did not find any TX-1.
RED LED means it is in standby mode.
WINDOWS 7 AND MAC OS, SOUND OUTPUT
When connecting the TX-1 transmitter to a computer using Windows 7 or Mac OS, you need to select the sound output.
Go to: system settings, find sound settings, and select AudoPro TX-1 as your sound output.
9