Sonoff SNZB-04 Instructions D'opération page 9

SONOFF TECHNOLOGIES CO., LTD.
3. Add sub-devices
Connect the Bridge before adding the sub-device
ZBBridge
Added:0
No child device,please add.
Access eWeLink APP, select the Bridge that you want to connect,
and tap "Add" to add a sub-device. Then long press reset button on
the device for 5s until the LED indicator flashes three times, which
means the device has entered the pairing mode, and be patient
until pairing completes.
If the addition failed, move the sub-device closer to the Bridge and try again.
Specifications
Model
Battery model
Wireless connection
Quiescent current
Emission current
Installation gap
Working temperature
Working humidity
Material
Dimension
Add
SNZB-04
CR2032(3V)
ZigBee (IEEE 802.15.4)
<2uA
<15mA
<10mm
-10℃~40℃
10-90%RH (non-condensing)
PC
Transmitter: 47x27x13.5mm
Magnet: 32x15.6x13mm
>
8
English