Beko TBS8154R Manuel page 12

2
Use
Adding some water into the appliance will allow it run smoothly
(e.g. 40ml water for 60gr solid food). Add the water before the
ingredients.
If you want to add food into the jug (3) during the blending pro-
cess, use the measuring cap (1) inlet. Raise this cap and feed
the food in through this opening.
WARNING: Do not insert any foreign objects into the jug
(3) when the appliance is in use.
Plug in the appliance and
move the ON/OFF button (8)
down to (I) position.
12 / EN
3
2
Process the ingredients at
the desired speed using
the speed adjustment but-
ton (9). When the process is
complete, move the ON/OFF
button (8) up to (O) position
and unplug the appliance.
1
Pull up the jug (3) without
turning it to remove it from
the motor unit (7). Open the
lid (2) and take out the food.
2
1