Publicité
Les langues disponibles
Les langues disponibles
Do not touch the heather with wet hands.
•
Do not handle with bare feet.
•
Do not pull the electric cord or the device itself to unplug it from
•
the socket; pull the plug directly.
9. Heaters should not be installed in areas where hazardous vapours
may be present.
10. Avoid the use of an extension cord with this product, because
the extension cord may overheat and cause a risk of fire.
11. Do not apply any modification to the product that could compro-
mise the safety.
12. Keep connections dry.
13. If the power supply cord is damaged, avoid to use the appliance.
For power cord replacing, please contact the manufacturer or the
technical service or a person with similar qualification, in order to
avoid any risk.
14. If the appliance is not used for a long period, disconnect it from
the power supply.
15. The heaters are fitted with safety guards. These are intended
only to stop large objects from hitting the emitters. On no ac-
count should the heater be operated with the guard removed.
CAUTION — Some parts of this product can become very
hot and cause burns. Particular attention
has to be given where children and vulnerable people are
present.
2. INSTALLATION (MOD. 769 AND 769S)
Installation should always be carried out by a qualified electrician or
a competent person in accordance with the standards that regulate
the electrical systems and according to the UE 2015/1188 standards.
The energy supply must be done through a properly grounded sock-
et. The sets have to be connected to the main by skilled personnel, using
a duly dimensioned silicon rubber cable H07RN-F.
The product is in class I and IP65, wich is the protection rate for the
units to be used even outdoor. For keeping the protection rate of the
appliance, the connection of the appliance with the power supply
must be done by means of a minimum IP65 system, as per the ef-
fective regulations in each country.
11
Publicité
