Mescomp Technologies harma klinik AC 201 Mode D'emploi page 31

b. Sit upright on the chair to have correct posture. (Refer
to Correct Posture in Taking Blood Pressure as
Attaching pressure cuff at section XXIII")
c. Press START/STOP button all elements display '888'
in 3 seconds. Afterward, display the update time. The
monitor will automatically inflate to the level that is right
for you.
* D o n o t m o v e o r t a l k i n t h e
midst of taking blood pressure
measurement.
d. After the air pressure is increased,
it will slowly decreased. When the
pulse is detected, HEART RATE
symbol will start flashing.
e . A f t e r t a k i n g b l o o d p r e s s u r e
measurement, the systolic rate,
diastolic rate and Pulse rate will
be on the display for 1 minute and
then auto shut off if without any
operation.
4. Storing, recalling and erasing measurement data :
a. Storing data:
After each blood pressure measurement, the Systolic
pressure, Diastolic pressure, Pulse rate and the time
& date of specific day will be automatically stored. The
memory holds the latest 99 measurement data. If more
than 99 measurements, the memory will automatically
clear out the earliest data.
XXIV. How to measure
29
P
kPa
ERROR
P
mmHg
kPa
ERROR