Mescomp Technologies harma klinik AC 201 Mode D'emploi page 30

1. Inserting 4 pieces "AA" Alkaline batteries in position:
a. Open battery cover
b. Refer to the picture in positioning
batteries
c. All segments will appear on the
display in 3 seconds.
d. Display 1 month 1 date, 12 hour 0
minute.
2. Setting Month, Date and Time :
a. Press "MODE" button ( " month "
starts flashing.)
Press "SET" button to set the
correct month (1,2,3,.....12)
b. Press "MODE" button again ( " date " starts flashing )
Press "SET" button to set the correct date
c. Press "MODE" button again ( " hour " starts flashing )
Press "SET" button to set the correct hour in 12-hour format.
d. Press "MODE" button again (" minute " starts flashing)
Press "SET" button to set the correct minute
(0,1,2,3,....59)
e. Press "MODE" button again to switch
to normal time. (month:10 , date:5,
hour:12and minute:00 appear on then
display will be as right picture)
f. Device is ready to start.
3. Steps to take blood pressure
measurement:
a. Wrap the cuff around the arm ( Refer to "Attaching
pressure cuff at section XXIII ") to measure.
XXIV. How to measure
28