Safety Instructions - Rockford Fosgate PUNCH 201S Installation Et Fonctionnement

Welcome to
information for the owner, salesperson and installer. For those of you who want quick information
on how to install this product, please turn to the Installation Section of this manual. Other
information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked
very hard to make sure all the information in this manual is current. But, as we are constantly
finding new ways to improve our product, this information is subject to change without notice.
CAUTION: To prevent injury and damage to the unit, please read and follow the
!
instructions in this manual. We want you to have enjoyment from this
system, not a headache.
CAUTION If you feel unsure about installing this system yourself, have it installed
!
by a qualified Rockford Fosgate technician.
CAUTION Before installation, disconnect the battery negative (-) terminal to
!
prevent damage to the unit, fire and/or possible injury.
Either a Model 201S, 301S, 401S, 501S,
601S or 801S Punch 2-Channel Amplifier
Installation & Operation Manual
Mounting Hardware Kit
Remote Punch Bass Kit with Cord
1 High Level Input Harness
1 3/32" Allen Wrench
1 7/64" Allen Wrench
The hardware kit included with each amplifier contains the mounting hardware necessary to secure
the amplifier to the vehicle and to attach the end caps to the amplifier.
NOTE: Refer to the specifications section for recommended fuse sizes for Model 801S
Visit our web site for the latest information on all Rockford products.
GETTING STARTED
Rockford Fosgate!
This symbol with "WARNING" is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions will result in severe injury or death.
This symbol with "CAUTION" is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions can result in injury or unit damage.
www.rockfordfosgate.com
This manual is
1 Terminal Connector for REM power wire
1 Fuse Connector (201S, 301S, 401S, 501S
and 601S Only)
1 20 Amp Fuse (201S)
1 30 Amp Fuse (301S)
1 40 Amp Fuse (401S)
1 50 Amp Fuse (501S, 601S)
designed to provide
S I
AFETY NSTRUCTIONS
C C
ONTENTS OF ARTON
3