Getting Started; Safety Instructions - Rockford Fosgate PRO Serie Mode D'emploi

Welcome to
information for the owner, salesperson and installer. For those of you who want quick information
on how to install this product, please turn to the Installation Section of this manual. Other
information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked
very hard to make sure all the information in this manual is current. But, as we are constantly
finding new ways to improve our product, this information is subject to change without notice.
CAUTION: To prevent injury and damage to the unit, please read and follow the
!
instructions in this manual. We want you to have enjoyment from this
system, not a headache.
CAUTION If you feel unsure about installing this system yourself, have it installed
!
by a qualified Rockford Fosgate technician.
CAUTION Before installation, disconnect the battery negative (-) terminal to
!
prevent damage to the unit, fire and/or possible injury.
Either a Model 301SP or 401SP
2-Channel Amplifier
Installation & Operation Manual
Mounting Hardware Kit
Remote Punch Bass Kit with Cord
1 High Level Input Harness
The hardware kit included with each amplifier contains the mounting hardware necessary to secure
the amplifier to the vehicle and to attach the end caps to the amplifier.
Visit our web site for the latest information on all Rockford products.

GETTING STARTED

Rockford Fosgate!
This symbol with "WARNING" is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions will result in severe injury or death.
This symbol with "CAUTION" is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions can result in injury or unit damage.
www.rockfordfosgate.com
This manual is
1 3/32" Allen Wrench
1 7/64" Allen Wrench
1 Terminal Connector for REM power wire
1 Fuse Connector
1 30 Amp Fuse (301SP)
1 40 Amp Fuse (401SP)
designed to provide
S I
AFETY NSTRUCTIONS
C C
ONTENTS OF ARTON
3