Addressing Switch - Eden C4PLUS-FX Notice Technique

 USE IN CENTRALISED MODE WITH SENATOR FX®
Notice technique / Technical manual - ENCOD-USB – V1.0

2) Addressing switch

This switch enables an identifier to be assigned to control units on the network.
Switch position:
1 2 3 4 5 6 7 8
Key:
ON
1 2 3 4 5 6 7 8
ON
Address 0 (not used)
Address 1
Address 2
Address 3
Address 4
Address 5
Address 6
Address 7
Address 8
Address 9
Address 10
Address 11
Address 12
Address 13
Address 14
Address 15
In this example, all the switches are set to ON.
Address 16
Address 17
Address 18
Address 19
Address 20
Address 21
Address 22
Address 23
Address 24
Address 25
Address 26
Address 27
Address 28
Address 29
Address 30
Address 31
Address 32
p.33/38