Publicité
Les langues disponibles
Les langues disponibles
CPU Socket
Introduction to the LGA 2011-3 CPU
The surface of the LGA2011-3 CPU has
four alignment keys and a yellow triangle
to assist in correctly lining up the CPU
for motherboard placement. The yellow
triangle is the Pin 1 indicator.
Important
Always unplug the power cord from the power outlet before installing or removing
y
the CPU.
Please retain the CPU protective cap after installing the processor. MSI will deal
y
with Return Merchandise Authorization (RMA) requests if only the motherboard
comes with the protective cap on the CPU socket.
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
y
is necessary to prevent overheating and maintain system stability.
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
y
your system.
Overheating can seriously damage the CPU and motherboard. Always make sure
y
the cooling fans work properly to protect the CPU from overheating. Be sure to
apply an even layer of thermal paste (or thermal tape) between the CPU and the
heatsink to enhance heat dissipation.
Whenever the CPU is not installed, always protect the CPU socket pins by covering
y
the socket with the plastic cap.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the
y
documentation in the heatsink/ cooler package for more details about installation.
This motherboard is designed to support overclocking. Before attempting to
y
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI
inadequate operation beyond product specifications.
12
Overview of Components
does not guarantee the damages or risks caused by
®
Publicité
