Warnings - Vela Meywalk 2000 Large Manuel De L'utilisation

1.1. WARNINGS

Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
Use
6
Only use original spare parts from VELA.
Do not make any changes to the accessories that come with the gait trainer.
Only use the gait trainer for the intended purpose.
Before using it, make sure that all parts of the gait trainer are securely fastened.
The gait trainer may only be used under supervision. The wheels roll very easily, so it is
important to be aware of the surroundings and any dangers that the user may encounter.
Always activate the brake before you enter or exit the gait trainer. However, the brake
must always be deactivated when the gait trainer is in use to avoid the risk of tipping.
The tilt bar must always be raised and lowered by hand - avoid stepping on the tilt bar.
A tilting bar raises and lowers the gait trainer when getting in and out. Be prepared for an
upward force that grows gradually as the tilt bar raises. Never let go of the tilt bar in the
middle of a raising or lowering movement, as it can injure the user and helper.
Only use the gait trainer on solid surfaces. Avoid using it on sloping, uneven, loose, wet
or icy surfaces, or on surfaces with level differences, as it may cause tipping risk.
The spring system can pose a risk if the gait trainer is used by a very restless user. VELA
Meywalk 2000 must never be used without springs.
Do not use the gait trainer during adjustments, to avoid pinches from moving parts.
VELA Meywalk and its accessories are designed for your safety. Removing parts of the
equipment can result in open pipe ends that can be sharp and cause damage. These
open pipe ends must be closed with plastic plugs - do not touch open pipe ends with
fingers or other body parts.
Maintenance other than cleaning should always be performed by a professional.
Never service the gait trainer while in use
Always follow the recommended maintenance and cleaning instructions
Protect the gait trainer's padded surfaces from direct sunlight or cover the surfaces as they
can become very hot and cause damage to the skin.