Adjusting The Height Of The Trunk Support; Seat Height Adjustment; Adjusting The Seat; Adjusting The Seat Angle - Vela Meywalk 2000 Large Manuel De L'utilisation

E N

2.0.5. ADJUSTING THE HEIGHT OF THE TRUNK SUPPORT

Loosen the two lower Allen screws and hand screws on the top
of the gait trainer. Place the trunk support at the desired height
(use the height markings in the frame to ensure the same height
on both sides). Tighten the Allen screws and hand screws again.
Note: the seat height changes when the height of the trunk
support changes.

2.0.6. SEAT HEIGHT ADJUSTMENT

Loosen the two Allen screws and hand screws on the top of the
gait trainer. Set the seat height to the user's stride length (use
the height markings in the frame to ensure the same height on
both sides). Remember to tighten the screws again. Note: Never
adjust the height of the seat while the gait trainer is in use.

2.0.7. ADJUSTING THE SEAT

Loosen the Allen screw in the bracket that holds the seat in
place. The seat can then be adjusted forwards or backwards.
Tighten the Allen screw again so that the seat locks in the
desired position. Note: never adjust the position of the seat
while the gait trainer is in use.

2.0.8. ADJUSTING THE SEAT ANGLE

Loosen the four nuts under the seat. Adjust the angle of the
seat to the desired position and tighten the four nuts again.
Note: never set the seat angle while the gait trainer is in use.
1 3