Installation Instructions - Haier HLP141E Guide De L'utilisateur

English

INSTALLATION INSTRUCTIONS

Location for installation and options for various walls
1. There are 2 mounting options- either using wood slats or a whole plywood
board. The dryer installation to the wall should be able to accommodate the
weight of the unit of 57.3 lbs. plus about 10 lbs. for clothing (or approximately
67.3 lbs). We suggest you use a plywood board for added support and safety,
this is the best way to mount.
Mounting Dryer Bracket to wall
(Use template provided)
6 to 8 inches from Dryer to Celing
A. Sheet Rock
6 inches
Sheet Rock
Wrong way
to install
2. Determine dryer position on the wall. A minimum of 6"(Inches) is needed
between the top of the dryer and the ceiling for installation.
3. If mounting the dryer above a washing machine, allow sufficient space to
open the top lid of the washer.
4. The Best installation is to add a plywood board to the wall studs. As a
second option- you can use two (2) slats(2 by 4" ) and attach to studs.
9
6 inches
B. Wood slats
6 inches
Wood salts
Good way
Add 2 wood
slats to studs
C. Plywood Back
6 inches
Plywood
25 inches
Best way
Add plywood
to studs