DeWalt D25763 Traduction De La Notice D'instructions Originale page 7

Residual Risks
The following risks are inherent to the use of rotary
and chipping hammers:
– Injuries caused by touching the rotating parts or
hot parts of the tool
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
Clutch Setting 40 Nm is designed for
most drilling applications.
Clutch Setting 80 Nm is designed for
higher torque applications.
Red service indicator LED. For detailed
description see under Service Indicator
LED's.
Yellow service indicator LED. For detailed
description see under Service Indicator
LED's.
DATE CODE POSITION (FIG. 1)
The Date Code (w), which also includes the year of
manufacture, is printed into the housing.
Example:
2013 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Rotary hammer
1 Side handle
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Lock-on slider
c. Side handle
d. Main handle
e. Active vibration control
f. Mode selector switch
g. Electronic speed and impact control dial
h. Clamp wheel
i. Side handle clamp
j. Steel ring
k. Bush
l. Tool holder
m. Pin
n. Collar
o. Locking sleeve
INTENDED USE
Your rotary hammer has been designed for
professional rotary drilling and chipping applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These hammers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
EN GL IS H
5