Steinberg Systems SBS-EH-600/18 Manuel D'utilisation page 33

Do not move loads that are pinned to the ground or blocked by other
jj)
objects.
Loads must be lifted off the ground at the slowest possible speed.
kk)
The permissible load is constant and does not depend on the position
ll)
in which the load is placed.
The device is not designed for continuous operation. Observe the
mm)
operating cycle of the device.
If the equipment is used in noisy environments, the operator should
nn)
wear hearing protection.
The A-weighted sound pressure level at the operator's station is less
oo)
than 70 dB.
The ambient temperature in the operating area should be between 0-
pp)
40°C.
The service life of the device is approximately 8000 cycles (excluding
qq)
wear parts). If the device has completed 8000 cycles, all components of
the device must be checked and maintained.
The cable must be under tension when lifting the load.
rr)
Always make sure that the load is properly and securely attached to the
ss)
hook.
Always maintain a safe distance from the load and rope.
tt)
Make sure the cable is properly wound on the drum before operating
uu)
the unit.
Do not use limit switches as routine stop items. They are emergency
vv)
devices only.
Do not drag loads on the ground.
ww)
CAUTION! Although the product has been designed to be safe, with
adequate safeguards, and despite the additional safety features provided
to the user, there is still a slight risk of accident or injury when handling
the unit. You are advised to use caution and common sense when using
this product.
3. Rules of use
The machine is designed for vertical lifting and lowering of loads.
The user is responsible for any damage resulting from misuse.