Publicité
Les langues disponibles
Les langues disponibles
The automatic water softener comprises:
- An AUTOMATIC VALVE that controls the various recharge phases,
- A glass fibre-reinforced resin CYLINDER,
- The CATIONIC RESIN in the CYLINDER,
- A polythene RECEPTACLE for storing the regenerating salts (sodium chloride = coarse household salt),
- A SAFETY FLOAT in the salt receptacle.
- 1 FILTRATION SET to install before the softener.
The water softener is controlled by an automatic valve, the operating cycle of which comprises five phases:
- SERVICE
- BACKWASHING
- BRINE INTAKE AND SLOW WASHING
- FILLING for BRINE
- FAST WASH
The valve is made of Noryl and contains a residual hardness mixer (MIX) and an automatic bypass during
recharging.
Unions: 3/4" (20x27) G male.
Flow union: sleeve for pipe, 12 mm i.d.
Hard water is passed through a layer of ion-exchanging resin which has the property of filtering out the
deposit-forming salts (calcium and magnesium), and replacing them by non-deposit-forming salts (sodium).
When the resin is saturated, it can be regenerated by washing with a sodium chloride (household salt)
solution (brine). This causes another exchange, but in the opposite direction, which leaves the resins ready
to resume soft water production. This process is entirely automatic.
26
Altech
Publicité
