Standby Mode; Auto Vent Fan; Control Lock - Whirlpool YWML35011KS Mode D'emploi

Keypad
SOFTEN/MELT
COOK

Standby Mode

When no functions are being used, the microwave oven will switch
to Standby Power mode and slightly dim the display brightness
after about 2 minutes. Touch any key or open/close the door, and
the display will return to the normal brightness.

Auto Vent Fan

To keep the microwave oven from overheating, the auto vent fan
will automatically turn on if the temperature from the range or
cooktop below exceeds a certain temperature. When this occurs,
the vent fan can not be turned off and the fan speed can not be
changed. "AUTO FAN" will stay lit until the microwave oven cools.
8
Feature Instructions
Soften/Melt The SOFTEN/MELT function is used to soften or melt food. To use:
1. Press SOFTEN/MELT. The
2. Use the number keypads to select a food category, see the SOFTEN/MELT
3. Use the number keypads to enter the quantity. "Start?" will flash on the
4. Press START button.
Auto Cook
To use the auto cook presets, follow the instructions below:
1. Press COOK. The
2. Use the number keypads to select a food category. See the COOK section
3. Use the number keypads to enter the quantity. "Start?" will flash on the
4. Press Start button.
section in this guide for the food category or reference the sticker on the door
of the microwave.
display.
When the stop time is reached, the microwave oven will shut off
automatically, and the end tone will sound.
icon will show on the display.
in this guide for the food category or reference the sticker on the door of the
microwave.
display.
When the stop time is reached, the microwave oven will shut off
automatically, and the end tone will sound.
The Control Lock shuts down the control panel keypad to avoid
unintended use of the microwave oven.
When the control is locked, only the fan and light will function.
To Lock Control: Touch CANCEL for approximately 3 seconds,
until a tone sounds and a
To Unlock Control: Repeat to unlock. A tone will sound and the
icon will be removed.
icon will show on the display.

Control Lock

icon appears on the display.