Wash Cycles And Options; Table Of Programmes And Wash Cycles; Wash Options - Hotpoint Ariston WMUG 501 Mode D'emploi

Wash cycles and options

Table of programmes and wash cycles

Description of the wash cycle
1
Anti Stain
2 Whites
3 (1):
Cotton Standard 60°
Cotton Standard 40° (2):
4
5
Synthetics: heavily soiled resistant colours.
5 Synthetics (4): lightly soiled resistant colours.
6 Anti allergy
7 Baby
8 Wool: for wool, cashmere, etc.
9 Delicates
Fast Wash 60': to refresh normal soiled garments quickly (not
10
suitable for wool, silk and clothes which require washing by hand).
11
Cotton Standard 20°: lightly soiled resistant and delicate colours.
12 Eco Cottons
13
Eco Synthetics
14 Eco Fast 30'
Rinse
Spin and Pump out
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 4 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the "Prewash" function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 4 with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C.

Wash options

Extra Rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is guaranteed. It
is particularly useful for sensitive skin.
! It cannot be used in conjunction with wash cycles 6, 9,
14, .
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: Put the detergent in the relevant compartment.
! It cannot be used in conjunction with wash cycles 3 (60°),
4, 6, 8, 9, 10, 11, 12, 13, 14,
heavily soiled whites and resistant colours.
lightly soiled resistant and delicate colours.
, .
Detergents
Max.
Max.
spe-
temp.
ed
(°C)
(rpm)
40° 1000 -
 
60° 1000 -
 
60°
1000 (3)  
(Max. 90°)
40° 1000 -
 
60° 800
  
40° 800
  
60° 1000 -
 
40° 1000   
40° 800 - -

30° 0 - -

60° 1000 - -

20° 1000 -
 
Cold
1000 -  -
Water
Cold
800 - -

Water
Cold
800 - -

Water
- 1000 - - -
- 1000 - - -
3 - - - 180'

3 - - - 190'

5 62 0.83 47.5 200'

5 62 0.75 48 150'

3 46 0.88 38 110'

3 46 0.55 37 95'

3 - - - 185'

 3 - - - 160'
1 - - - 70'

0.5 - - - 75'

3.5 62 0.71 35 60'

5 - - - 230'

 5 62 0.17 53 95'
2.5 49 0.11 37 75'

2.5 71 0.06 30 30'

 5 - - - 49'
- 5 - - - 16'
GB
9