Wash Cycles And Options; Table Of Programmes And Wash Cycles; Wash Options - Hotpoint Ariston FMG 1023 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

Wash cycles and options

Table of programmes and wash cycles

Description of the wash cycle
CLEAN Plus
1
Anti Stain
2
Anti Stain Quick
3
Whites
4
Cotton Standard 60°C
5
Cotton Standard 40°C
6
Synthetics: heavily soiled resistant colours.
6
Synthetics (4): lightly soiled resistant colours.
SPECIALS
7
Anti allergy Plus
8
Anti allergy Delicate
9
Wool: for wool, cashmere, etc.
10
Delicates
ECO
11
Cotton Standard 20°C: lightly soiled resistant and delicate colours.
12
Eco Cottons
13
Eco Synthetics
14
Eco Fast 30'
Partial Programmes
Rinse
Spin and Pump out
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with regulations 1061/2010: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulations 1061/2010: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the "Prewash" function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.

Wash options

! If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option will
not be activated.
! If the selected option is not compatible with a previously
selected one, the indicator light corresponding to the first
function selected will flash and only the second option will be
activated; the indicator light for the option which has been
activated will be illuminated.
Extra Rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is guaranteed. It
is particularly useful for sensitive skin.
(1):
heavily soiled whites and resistant colours.
(2):
lightly soiled resistant and delicate colours.
Detergents
Max.
Max.
temp.
speed
(°C)
(rpm)
40°
1200
-
40°
1200
-
-
60°
1200
-
60°
1200 (3)  
(Max. 90°)
40°
1200
-
 
60°
800
 
40°
800
 
60°
1200
-
 
40°
1200
-
 
40°
800
-
-
30°
0
-
-
20°
1200
-
 
Cold
1200
-
-
Water
Cold
800
-
-
Water
Cold
800
-
-
Water
-
1200
-
-
-
-
1200
-
-
-
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: Put the detergent in the relevant compartment.
6
-
-
-
190'
5
-
-
-
60'
6
-
-
-
195'
10 53 1,24 60 220'
10 53 0,94 85 190'
5,5 48 1,21 74 125'
5,5 48 0,71 72 105'
6
-
-
-
205'
6
-
-
-
240'
2,5
-
-
-
100'
1
-
-
-
80'
10
-
-
-
185'
10 53 0,20 98 105'
3,5 48 0,11 70 80'
3,5 71 0,05 44 30'
10
-
-
-
49'
-
10
-
-
-
16'
9
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fmg 1023b eu

Table des Matières