Inspired by life
Technical specifications Presto/ Presto S
Intended use: outdoors, between -25° C and + 50° C,
on paved paths and roads
L x w x h: 1340 x 650 x 1135 mm (Presto)
L x w x h: 1385 x 650 x 1135 mm (Presto S)
Height with headrest +180 mm
Height without seat 690 mm
Weight without batteries: 87 kg
Weight with batteries (60 Ah): 122 kg)
Weight of heaviest removable part (seat): 23 kg
Maximum static stability downhill: 15 º
Maximum static stability uphill: 15 º
Maximum static stability sideways uphill: 15 º
Maximum dynamic stability uphill: 10 º
Rated slope: 10 º
Max. driving theoretical distance according to ISO
7176-4 with fully-charged batteries*:
29 km (18 miles - 50 Ah) / 35km (22 miles - 60 Ah) /
44 km (27 miles - 73 Ah)
Maximum obstacle height: 100 mm
Maximum obstacle drop (pavement): 100 mm
Ground clearance: 80 mm
Max. (programmable) speed forward: 15 km/h**
Minimum braking distance from maximum speed
(programmable): 3600 mm
Seat angle: 3 º
Seat depth: 440 mm
Seat width: 510 mm
Seat height above footrest (min. - max.): 470 - 545 mm
Height of footrest above ground: 190 mm
Backrest angle: 90 - 110º
Backrest height: 500 mm
Armrest height (to seat): 190 - 240 mm
Armrest length (to backrest): 350 mm
Turning circle (radius): 1600 mm
Turn around width: 2000 mm
Test dummy weight: 160 kg
Max. user weight: 160 kg
Required operating force: approx. 1-30N
Battery capacity (optional): 50/60***/73*** Ah
Max. load: 8 amps
EN10
* Depending on the
set speed, outside
temperature, weight of
the user, tyre pressure,
etc.
** Less is possible
*** Gel batteries
Motor, transaxle: 850 watts 24 V (Presto)
Motor, transaxle: 1000 watts 24 V (Presto S)
Charger type: 8 Amp 24 V
Maximum sound power level 75 Db
Magnetic brake: 8 Nm 24 V
Ability to dismantle for transport: limited (See also
page 29)
Wheel size: 3.00 – 8 (Tubeless tire)
Complies with: EN 12184 class C
The mobility scooter has 2 12-volt dry (gel) batteries.
The following types are suitable:
50 Ah
(198 x 166 x 171 mm) (14,2 kg)
60 Ah*** (260 x 170 x 178 mm) (17,7 kg)
73 Ah*** (260 x 170 x 210 mm) (23,6 kg)
Test specifications
The scooter conforms to the following standards:
ISO 7176- 8,9,14,16
Requirements and test methods for static, impact
and fatigue strengths: ISO 7176-8
Climatic tests for scooters: ISO 7176-9
Power and control systems for scooters: ISO 7176-14
Requirements for resistance to ignition of
upholstered parts: EN1021-2
Service and technical support
Contact your dealer if you have any questions about
specific settings, maintenance or repairs. Always have
the serial number ready. You can find these on the
mobility scooter's CE sticker (see also page 20).
Expected service life
Life & Mobility assigns a service life of 6 years to this
product. This means that during this period, the
product is fixable, safe and usable.
The statement above is only applicable if the user uses
the product in the manner that Life & Mobility intended,
marked with CE and including any original accessories.
EN11