Filter Cleaning - Klarstein HEKTOR BRILLIANT EDITION Mode D'emploi

FILTER CLEANING

Note: Always switch off the appliance before cleaning. Do not detach the filter from
the frame, otherwise it may be damaged. If connections or cables are damaged,
contact a specialist company for repair.
Cleaning the grease mesh filter
The mesh filters can be cleaned by hand. Soak them for about 3 minute in water with a
grease-loosening detergent then brush it gently with a soft brush. Please do not apply
too much pressure, avoid to damage it. Leave the mesh filter to dry naturally, out of
direct sun light. Filters should be washed separately to crockery and kitchen utensils. It is
advisable not to use rinse aid.
Installing the grease mesh filter
• Angle the filter into slots at the back of the hood.
• Push the button on handle of the filter.
• Release the handle once the filter fits into a resting position.
• Repeat to install all filters.
EN
23