Installation - Klarstein HEKTOR BRILLIANT EDITION Mode D'emploi

EN
Slide the cooker hood into the cabinet housing. Tighten the screws from the top. Note for the outlet hole in
the cabinet: The air outlet at the top of the cooker hood is offset by 35 mm, measured from the centre of the
hood.
20

INSTALLATION

1
The cooker hood should be placed
65-75 cm (26-30 inches) above the
cooking surface for optimum effect.
WARNING
Risk of electric shock! Only use fi xing or mounting screws of the
recommended size. Failure to install screws or mounting devices
according to these instructions may cause electrical hazards.
Saw a 500*275 mm hole in the
underside of the wall cabinet. Make
sure that the edge of the hole is at least
35 mm from the edge of the cabinet.
3
2