Publicité
Les langues disponibles
Les langues disponibles
WiFi connection cannot
be established.
Wired connection
cannot be established.
No station is found.
Hiss in FM mode
No stations available /
burbling / intermittent in
DAB mode.
Alarm does not work.
USB driver or MP3
player is not detected.
NetRemote does not
show or connect to
ICD2070
All other undetermined
cases.
4. A firewall is activated on the network – set the respective
program in such a way that access is possible.
5. Reboot the router
1. Check the availability of WLAN network on the router.
2. Place the device closer to the router.
3. Make sure the password is correct.
1. Check the availability of LAN network on the access point.
2. Reconnect or even replace the LAN cable.
1. Check the network as well as the access point and firewall.
2. The station may not be available currently, try it again later or
select another station.
3. The link of the station is changed or the station no longer
transmits – ask the provider for information.
4. The link of manual added station is not correct, make sure it is
correct and re-enter.
Check/move the FM antenna or move the radio
1. Move the radio.
2. Rescan local stations only (high-strength).
3. Check the local DAB coverage.
1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of "No sound".
3. The source of alarm was set to be station but there is no network
connection. Change the source of alarm or reconfigure the
connection.
1. Check if the USB driver or MP3 player is plugged properly.
2. Some USB hard disks need external power supply, make sure it
is connected to the power.
3. Not all MP3 players can be read directly on the device – use an
USB drive instead.
1. Reopen the App.
2. If you have several streaming from several devices at the same
time, it may cause crash, reboot ICD2070 and/or your device.
ICD2070 may process large amount of data after a period of
operation, no matter in which mode, it will cause the system
freeze or malfunction. Reboot ICD2070 if necessary.
The normal function of the product may be disturbed by strong
Electro-Magnetic
Interference. If so, simply reset the product to resume normal
operation by following the instruction manual. In case the function
could not resume, please use the product in other location.
19
ICD2070 / English Instruction Manual
Publicité
