Resol SD3 / SDFK Manuel page 9

Smart Display SD3 / SDFK
The RESOL Smart Displays SD3 and SDFK are used for visualising data issued
by the controller. The Smart Display SD3 indicates the collector temperature, the
store temperature and the energy yield of the solar thermal system. In the heating
area, the Smart Display SDFK indicates the solid fuel boiler temperature and the
bottom/top store temperatures as well as the pump status. Both Smart Displays
are designed for simple connection to RESOL controllers with VBus
power supply is not required.
• Visualisation of collector and store temperature as well as heat quan-
tity (SD3)
• Visualisation of solid fuel boiler temperature and bottom/top store
temperature as well as pump status (SDFK)
• One 6-digit and two 4-digit 7-segment LED displays (SD3)
• three 4-digit 7-segment LED displays as well as one bicoloured LED
red/green (SDFK)
• Simple connection and power supply via RESOL VBus
• °C and °F versions available
Note
Remove protective fi lm from front plate or housing if necessary.
technical Data
Housing: High-grade steel frame with wood elements
Dimensions: 150 x 165 x 24 mm
Protection type: IP20 (suitable for dry rooms)
Protection class: III
. An additional
®
Display: Numerical 7-segment LED display, bicoloured LED red / green (SDFK only)
Segment size: 7.5 x 10 mm, 10° digit inclination
Ambient temperature: 0 ... 40 °C
Power supply: via RESOL VBus
Data interface: RESOL VBus
®
®
®
9