Charging Modes And Functions - VOLTCRAFT VC-AL450 Mode D'emploi

b) Charging modes and functions
1. AGM mode (14.7 V ±0.25 V)
1
• This mode is designed to charge lead-acid, gel and lead-fleece batteries with a capacity of over 25 Ah at low
ambient temperatures.
• To select this mode, press the MODE button (1) until the AGM indicator (7) turns on. The charging process will
start automatically (4.5 A ±10 %).
• The FULL indicator (2) will turn on when the battery is fully charged (14.7 V ±0.25 V). The device automatically
switches to trickle charge mode.
You can use this mode for batteries that are designed for higher final charge voltages. Follow the charging
instructions provided by the battery manufacturer.
2. Wet/summer mode (14.4 V ±0.25 V, max. 4.5 A)
2
• This mode is designed to charge lead-acid, gel and lead-fleece batteries with a capacity of over 25 Ah at normal
ambient temperatures.
• To select this mode, press the MODE button (1) until the Flooded indicator (8) turns on. The charging process
will start automatically (4.5 A ±10 %).
• The FULL indicator (2) will turn on when the battery is fully charged (14.4 V ±0.25 V). The device automatically
switches to trickle charge mode.
3. 6 V motorcycle mode (7.2 V ±0.25 V)
3
• This mode is designed to charge 6 V batteries with a capacity of less than 24 Ah at normal ambient temperatures.
• To select this mode, press the MODE button (1) until the 6 V LED indicator (9) turns on. The charging process
starts automatically. The maximum charging current is 1 A ±10 %.
• The FULL indicator (2) will turn on when the battery is fully charged (7.2 V ±0.25 V). The device automatically
switches to trickle charge mode.
4. 12V motorcycle mode (14.4 V ±0.25 V)
4
• This mode is designed to charge 12V batteries with a capacity of less than 120 Ah at normal ambient temperatures.
• To select this mode, press the MODE button (1) until the 12 V LED indicator (10) turns on. The charging process
starts automatically. The maximum charging current is 1 A ±10 %.
• The FULL indicator (2) will turn on when the battery is fully charged (14.4 V ±0.25 V). The device automatically
switches to trickle charge mode.
5. Lithium mode (14.4 V ±0.25 V, max. 4.5 A)
5
• Lithium mode is designed to charge 12 V lithium rechargeable batteries (LiFePO 4 batteries). Follow the charging
instructions provided by the battery manufacturer.
• Press the MODE button (1) until the AGM (7) and Flooded (8) LED indicators start to flash. After approx. 2 sec-
onds, the LEDs will stay constant and the battery will start to charge. The charging process starts automatically.
The maximum charging current is 4.5 A ±10 %.
• The FULL indicator (2) will turn on when the battery is fully charged (14.4 V ±0.25 V). The device automatically
switches to trickle charge mode.
12